SPLASH ELECTR: Solar Pcu Design

INTELLIGENT THRIPLE STAGE CHANGEOVER PCU

voltage series : 6v,12v,24v,48v

amperage : 10 amp to 60 amp max

charger

type : zero drop or pwm

LCD DISPLAY PARAMETERS :

Battery voltage

solar amp or wattage (optional)

company name (optional)

solar charging status

battery reserve status

load status

mains on & off

LED INDICATION :

power on

battery reserve

mains on (or) off

battery reverse polarity indication

panel and battery reverse terminal indication

solar chargeing

WORKING :

first it will check for the presences of solar power ,if their is no solar power it will run in the normal power mode ,if the solar power is present it will not allow the ac mains in to the inverter so the battery will be charged only through solar power and the inverter will run on "solar inverter mode " This mode will be displayed on the display .

if it is displayed "solar inverter mode " that mean all the appliances connected to the inverter was running through the solar power .This solar inverter mode will continues until the solar inverter presents,at evening s when solar power was not their it will show "power mode"that mean their is no solar power present and all the appliances running through ac mains current .

if suppose if their is no solar power and main power it will display "inverte mode" when it is in solar inverter mode battery discharge parallely the battery will be charged through solar power with the same zero drop solar charger

Their will be a suggested load with respective to the solar panel .if the user uses more load than the suggested load battery will drain quckily .